Technical data

Brocade VA-40FC Hardware Reference Manual 27
53-1001540-04
Appendix
A
Brocade VA-40FC Specifications
In this appendix
•Access Gateway default port mapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
•Switch components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
•Weight and physical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
•Facility requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
•Power supply specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
•Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
•General specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
•Data transmission ranges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
•Memory specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
•Fibre Channel port specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
•Serial port specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
•Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
•Environmental regulation compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Access Gateway default port mapping
The Brocade VA-40FC can contain 40 total ports. Of these, F_Ports are ports 0-31 and N_Ports are
ports 32-39.
The following lists the factory-default F_Port to N_Port mapping for Access Gateway mode.
NOTE
Ports 32-39 are N_ports with failover and failback enabled.
• 0-3 mapped to 32
• 8-11 mapped to 34
• 16-19 mapped to 36
• 24-27 mapped to 38
• 4-7 mapped to 33
• 12-15 mapped to 35
• 20-23 mapped to 37
• 28-31 mapped to 39
For more information on changing port mapping, managing ports., and default policy settings for
Access Gateway Mode, refer to the Access Gateway Administrator’s Guide.