Specifications

Fabric OS Commands for Licensed Products
908 Fabric OS Version 3.1.x/4.1.x Reference Guide
Secure Fabric OS Commands
The following commands are available with the purchase of a Security license
key. For more detailed information about trunking refer to the HP StorageWorks
Secure Fabrics OS Version 1.0 User Guide.
Table 24: Secure Fabric OS Commands
Command Description
secfabricshow Displays security related fabric information.
secfcsfailover Enables a Backup FCS switch to take over as Primary
FCS switch.
sechelp Display information about security telnet commands.
secmodeenable Enable security mode.
secmodedisable Disable security mode.
secmodeshow Display if security mode is enabled or disabled.
secnonfcspasswd Set the admin password for non-FCS switches.
secpolicyabort Aborts all changes to the defined database that have
not been saved.
secpolicyactivate Apply defined policy set to all switches in the fabric.
secpolicyadd Add members to an existing policy.
secpolicycreate Create a new policy.
secpolicydelete Delete an existing policy.
secpolicydump Show all members of existing policies.
secpolicyfcsmove Move a member in the FCS policy.
secpolicyremove Remove members from an existing policy.
secpolicysave Save a defined security policy to flash memory on all
switches in the fabric.
secpolicyshow Show an existing security policy.
secstatsreset Reset security statistic for a policy or all policies to
zero.
secstatsshow Display security statistic for a policy or for all policies.
sectemppasswdreset Reset a password on a remote switch.