Specifications

Fabric OS Commands for Licensed Products
906 Fabric OS Version 3.1.x/4.1.x Reference Guide
Advanced Performance Monitoring Commands
The following commands are available with the purchase of an Advanced
Performance Monitoring license key. For more detailed information about
Performance Monitoring refer to the HP StorageWorks Advanced Performance
Monitoring Version 3.1.x/4.1.x User Guide.
Table 23: Performance Monitoring Commands
Command Description
perfAddEEMonitor
Add an end-to-end monitor to a port.
perfAddIPMonitor
Add an IP monitor to a port.
perfAddReadMonitor
Add a SCSI Read monitor to a port.
perfAddRWMonitor
Add a SCSI Read and Write monitor to a port.
perfAddSCSIMonitor
Add a SCSI traffic frame monitor to a port.
perfAddUserMonitor
Add a user-defined monitor to a port.
perfAddWriteMonitor
Add a SCSI Write monitor to a port.
perfCfgClear
Clear the performance monitoring settings
from flash memory.
perfCfgRestore
Restore performance monitoring settings from
flash memory.
perfCfgSave
Save the current performance monitoring
settings to flash memory.
perfcleareemonitor Clear statistics counters of an end- to-end
monitor on a port.
perfclearfiltermonitor Clear statistics counters of a filter-based
monitor.
perfClrAlpaCrc
Clear an AL_PA device CRC count by the port
and AL_PA.
perfDelEEMonitor
Delete an end-to-end monitor on port.
perfDelFilterMonitor
Delete a filter-based monitor.
perfSetPortEEMask
Set overall mask for end-to-end (EE) monitors.
perfShowAlpaCrc
Display the AL_PA CRC count by port or by
AL_PA.