Specifications

Fabric OS Commands for Licensed Products
902 Fabric OS Version 3.1.x/4.1.x Reference Guide
QuickLoop Fabric Assist Mode Commands
The following commands are for QuickLoop Fabric Assist Mode. For detailed
information about Extended Fabrics refer to the HP StorageWorks QuickLoop
Fabric Assist Version 3.1.x User Guide.
Note: The Quickloop Fabric Assist Mode feature is available on Fabric OS V3.1.x
only.
Table 19: QuickLoop Fabric Assist Mode Commands
Command Description
fazoneAdd
Add members to an existing QuickLoop Fabric
Assist zone.
fazoneCreate
Create a QLFA zone.
fazoneDelete
Delete an existing QuickLoop Fabric Assist zone.
fazoneRemove
Remove member or members from an existing
QuickLoop Fabric Assist zone.