Specifications

zoneShow
897Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays zone information.
Synopsis
zoneShow [“pattern”][, mode]
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display zone configuration information.
If no parameters are specified, all zone configuration information (both defined
and enabled) is displayed. See cfgShow for a description of this display.
If a parameter is specified, it is used as a pattern to match zone configuration
names, and those that match in the defined configuration are displayed.
Note: This command requires an Advanced Zoning license.
When security is enabled, this command can only be issued from the Primary FCS
switch. See “Security Commands” on page 941.
zoneShow