Specifications

Fabric OS Commands
864 Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays or sets the system time zone.
Synopsis
tstimezone [hourOffset [, minuteOffset]]
Availability
All users (display).
Admin (set).
Release
V3.1.x and V4.1.x
Description
Use this command to display or set the system time zone.
All switches maintain the current time zone setup in non-volatile memory.
Changing the Time Zone on a switch updates the local time zone setup and is
reflected in local time calculations.
All switches are by default in the 0,0 time zone, that is GMT. If all switches in a
fabric are in one time zone, it is possible to leave the time zone setup at the
default.
Time zone is used only in computing local time which is used for error reporting
and logging. An incorrect time zone setup will not affect the switch operation in
any way.
Enter this command with no parameters, to display the time zone setup. With the
valid parameters, it sets the time zone for an individual switch.
Negative hourOffset values mean the local time is behind GMT.
Example: -8,0 is GMT-08:00
Positive hourOffset values mean the local time is ahead of GMT.
Example: 3, 0 is GMT+03:00
tstimezone