Specifications

tsclockserver
861Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays or sets the NTP Server address.
Synopsis
tsclockserver [ipaddr]
Availability
All users (display).
Admin (set).
Release
V3.1.x and V4.1.x
Description
Use this command to synchronize the local time of the Principal or Primary FCS
switch to an external NTP server.
The Time Server daemon synchronizes fabric time by sending updates of the
Principal or Primary FCS local switch time periodically to every switch in the
fabric. The Time Server daemon runs on all switches in the fabric, but only the
Principal switch (when the Security feature not enabled), or the Primary FCS
switch (when the Security feature is enabled) connect to the NTP server, and
broadcast Time Service updates.
All switches in the fabric maintain the current clock server IP address in
non-volatile memory. By default this value is “LOCL.” Changes to the clock
server IP address on the Principal or Primary FCS switch are propagated to all
switches in the fabric.
Use this command with no parameters to display the current clock server IP
address being used. Specify the ipaddr operand to set the clock server IP
address, and enable fabric wide clock synchronization with the specified clock
server.
tsclockserver