Specifications

Fabric OS Commands
820 Fabric OS Version 3.1.x/4.1.x Reference Guide
Port State
(V3.1.x only)
State
(V4.1.x only)
Port state information:
■ No_Card - No interface card present
■ No_Module - No module (SFP or other) present
■ No_Light - Module not receiving light
■ No_Sync - Module receiving light but out of sync
■ In_Sync - Module receiving light and in sync
■ Laser_Flt - Module signaling a laser fault
■ Port_Flt - Port marked faulty
■ Diag_Flt - Port failed diagnostics
■ Lock_Ref - Locking to the reference signal
■ Testing - Running diagnostics
■ Online - Port is up and running
Port Distance
(V3.1.x only)
The port's long distance mode. If a port is configured as a long
distance port, the long distance level is shown in the format of
“Lx,” x being the long distance level number. See
portcfglongdistance for the level description.
comment The comment field may be blank, or it may display:
■ Disabled - The port is disabled
■ Bypassed - Port is bypassed (loop only)
■ Loopback - Port is in loopback mode
■ E_Port - Fabric port, shows WWN and name of attached
switch
■ F_Port - Point-to-point port, shows WWN of attached
N_Port
■ G_Port - Point-to-point but not yet E_Port or F_Port
■ L_Port - Loop port, shows number of NL_Ports
■ (Trunk master) - This port is the master port in a group of
trunking ports
■ (Trunk port, master is port #x) - This port is configured as a
trunking port, the master port is port number x.
■ (upstream) - This E-port is an upstream path towards the
principal switch of the fabric.
■ (downstream) - This E-port is a downstream path away
from the principal switch of the fabric.
■ WWN - This is the WWN of the switch connected to the
E-port.
■ “switch_name” - This is the switch name of the connected
switch.