Specifications

switchShow
819Fabric OS Version 3.1.x/4.1.x Reference Guide
The switch summary is followed by one line per port:
Zoning
(V3.1.x only)
Displays the switch zoning mode: On or Off.
Area
(V4.1.x only)
Each slot and port combination in the StorageWorks Core
switch is assigned an area number. For example, the area
number of slot 3/port 15 is 63 (in switch 0), the area number
for slot 10/port 15 is also 63 (in switch 1). This parameter is
for V4.1.x only.
Slot
(V4.1.x only)
Slot number. The StorageWorks Core switch has 10 slots
numbered from 1 to 4 and 7 to 10. Slots 5 and 6 are control
processor cards. This parameter is for V4.1.x only.
Port Number
(V3.1.x only)
Port
(V4.1.x only)
Port number. Valid values vary depending on the switch type.
Module Type
(V3.1.x only)
SFP
(V4.1.x only)
Port module type (SFP or other):
■ -- No module present
■ sw - Shortwave laser
■ lw - Longwave laser
■ cu - Copper
■ id - Serial ID
Use sfpshow to view whether a serial ID SFP is sw/lw/cu.
Port Speed
(V3.1.x only)
Speed
(V4.1.x only)
The speed of the port:
■ 1G - 1-Gbps fixed transfer speed
■ 2G - 2-Gbpsvfixed transfer speed
■ N1 - 1-Gbps negotiated transfer speed
■ N2 - 2-Gbps negotiated transfer speed
■ AN - Auto negotiating