Specifications

Fabric OS Commands
810 Fabric OS Version 3.1.x/4.1.x Reference Guide
Disable the switch.
Synopsis
switchDisable
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to disable the switch. All Fibre Channel ports are taken offline;
if the switch was part of a fabric, the remaining switches reconfigure.
The switch must be disabled before making configuration changes (using
configure or configDefault) or before running many of the diagnostic
tests. All commands that require the switch to be disabled send an error if invoked
while the switch is enabled.
The switch does not need to be disabled before rebooting or powering off.
As each port is disabled, the front panel LED changes to a slow flashing yellow.
Operands
None.
Example
To disable the switch:
switchDisable
switch:admin> switchDisable