Specifications

Fabric OS Commands
804 Fabric OS Version 3.1.x/4.1.x Reference Guide
Enable a switch persistently.
Synopsis
switchcfgpersistentenable
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to persistently enable the switch. The persistently enabled
switch remains enabled across power cycles and switch reboots. By default a
switch is enabled persistently.
When this command is executed, it will be effective immediately by enabling the
switch, if it is not already enabled.
The persistent switch disable configuration overrides all other switch
configurations but it does not alter any of them. The persistent switch enable will
also re-enable all previously set switch configurations.
A persistently enabled switch can temporarily be disabled by switchdisable
command until next switch enable, power cycle or switch reboot.
The persistent switch disable or enable configuration does not alter the persistent
disable or enable configurations of the ports within the switch.
Operands
None.
switchcfgpersistentenable