Specifications

Fabric OS Commands
802 Fabric OS Version 3.1.x/4.1.x Reference Guide
Disable switch persistently.
Synopsis
switchcfgpersistentdisable
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to persistently disable the switch. The persistently disabled
switch remains disabled across power cycles and switch reboots. It will not
participate in fabric reconfiguration and will remain isolated from the rest of the
topology. By default a switch is enabled persistently.
When this command is executed, it will become effective immediately by
disabling the switch, if it is not already disabled.
The persistent switch disable configuration overrides all other switch
configurations but it does not alter any of them. The
switchcfgpersistentenable command will enable the switch
persistently. The persistent switch enable will also re-enable all previously set
switch configurations.
The persistent switch disable configuration will override port persistent enable
configurations but it will not alter them.
The persistently disabled switch will still run the power on diagnostics and
initialize all the ports.
A persistently disabled switch can temporarily be enabled by switchenable
command until the next switch disable, power cycle, or switch reboot.
Operands
None.
switchcfgpersistentdisable