Specifications

Fabric OS Commands
798 Fabric OS Version 3.1.x/4.1.x Reference Guide
Example
To display switch information for debugging:
port1
(V4.1.x only)
Specify the first port of a range of ports to display information.
Enter the port area number. The default (if no operand
specified) is to print state of port 0. If only startPort is specified,
only information for startPort is printed. This operand is
required.
port2
(V4.1.x only)
Specify the last port of range of ports to display information.
Enter the port area number. If startPort is specified but endPort
is not specified, only endPort information is printed for the port
based commands (portshow, portregshow,
portrouteshow). If no operand is supplied, startPort is set to
0 and endPort is set to maximum port of switch. This operand is
required.
lines
(V4.1.x only)
Specify the number of lines output from this command. This
operand is optional.
switch:admin> supportshow
Kernel: 5.3.1
Fabric OS: v3.1
Made on: Tue Apr 6 16:57:22 PDT 2002
Flash: Thu Apr 1 10:23:43 PST 2002
BootProm: Thu Oct 1 13:34:29 PDT 2002
Up for: 12 secs
Powered for: 472 days, 19:15
Last up at: Tue May 2 10:48:21 2000
Reason: Reboot
37 34 37 45 49 Centigrade
98 93 98 113 120 Fahrenheit
Power Supply #1 is absent
Power Supply #2 is absent
byRdzdSRxyczSe0D:
Web license
Diagnostics Status: Tue Apr 6 16:22:34 1999
< ... sample output truncated ... >