Specifications

Fabric OS Commands
790 Fabric OS Version 3.1.x/4.1.x Reference Guide
Note: There is a LINK table that stores 16 pairs of SID-DID address. Each of the
SID-DID pairs is named a LINK. This table is used for gathering statistics that match the
LINK.
Operands
This command has the following operands:
Example
To run a statistics counter test on a switch (V3.1.x example):
To run a statistics counter test on a switch (V4.1.x example):
Errors: V4.1.x
When it detects failure(s), the subtest may report one or more of the following
error messages:
DIAG-STSINIT
DIAG-STSNULL
DIAG-STSSID
DIAG-STSXMIT
DIAG-STSRCV
DIAG-STSFRMCNT
passcount
(V3.1.x only)
-passcnt count
(V4.1.x only)
Specify the number of times to perform this test. The default
value is 1. This operand is optional.
-ports itemlist
(V4.1.x only)
Specify a list of user ports to run the test. If omitted, all the
user ports in the switch will be assumed. See itemlist
for more information about selecting ports. This operand is
optional.
switch:admin> statsTest
Running Statistics Cnt Test ... passed.
switch:admin>
switch:admin> statstest -passcnt 1 -ports 1/0-15
Running Statistics Counter Test ....... passed.
switch:admin>