Specifications

Table Of Contents
Fabric OS Commands
766 Fabric OS Version 3.1.x/4.1.x Reference Guide
View and modify options for configuring SNMP MIB trap capability.
Synopsis
snmpMibCapSet
Availability
Admin
Release
V3.1.x and V4.1.x
Description
This command enables a user to turn on or off certain MIBS and TRAPS. This
command also enables a user to turn on or off group information and SSN in SW
trap messages. It first displays current settings and then prompts the user to
change the values for each parameter.
FA-MIB - Specifying yes means the user can access FA-MIB variables with
an SNMP manager. The default value is yes.
HA-MIB - (V4.1.x only) Specifying yes means the user can access HA-MIB
variables with an SNMP manager. The default value is yes.
SW-TRAP - Specifying yes means the SNMP management application can
receive SW-TRAPS from the switch. The default value is yes.
FA-TRAP - Specifying yes means the SNMP management application can
receive FA-TRAPS from the switch. The default value is yes.
SW-EXTTRAP - (V4.1.x only) Specifying yes means the SNMP management
application can receive SW-EXTTRAPS from the switch. The default value is
yes.
HA-TRAP - (V4.1.x only) Specifying yes means the SNMP management
application can receive HA-TRAPS from the switch. The default value is yes.
Operands
None.
snmpMibCapSet