Specifications

sectransabort
741Fabric OS Version 3.1.x/4.1.x Reference Guide
Abort current security transaction.
Synopsis
sectransabort
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to abort the current transaction. This command is used to
recover from management application problems. This command will abort all
current changes that have not been committed or activated.
Note: This command can be issued from any switch in the fabric.
When security is enabled, this command can only be issued from the Primary FCS
switch. See “Security Commands” on page 941.
Operands
None.
Example
To abort the current security transaction:
sectransabort
primaryfcs:admin> sectransabort
Transaction has been aborted.
primaryfcs:admin>