Specifications

sectemppasswdreset
737Fabric OS Version 3.1.x/4.1.x Reference Guide
Reset a password on a remote switch.
Synopsis
sectemppasswdreset [domain[, login_name]]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
This command allows the user to remove temporary passwords that had been set
up using sectemppasswdset command. The password is restored to the
default password set up on non-FCS switches.
If a login name is not supplied, all passwords on the switch identified by the
specified Domain are refreshed. If the Domain is also not supplied, all temporary
passwords for all login levels are removed from every switch in the fabric.
Each switch has four accounts, Root, Factory, Admin and User. Root and Factory
accounts are disabled for non-FCS switches. If they are temporarily activated by
sectemppasswdset, those accounts are disabled by
sectemppasswdreset or rebooting the switch.
Note: When security is enabled, this command can only be issued from the Primary
FCS switch. See “Security Commands” on page 941.
sectemppasswdreset