Specifications

secpolicyremove
721Fabric OS Version 3.1.x/4.1.x Reference Guide
Remove members from an existing policy.
Synopsis
secpolicyremove “name”, “member;member”
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to remove members from an existing security policy. If a policy
is empty after removing all members, all accesses to the policy are disallowed (the
DCC_POLICY and OPTIONS_POLICY are an exception). You cannot remove
all members from the FCS_POLICY, and you cannot remove the FCS members
from the SCC_POLICY.
Note: When security is enabled, this command can only be issued from the Primary
FCS switch. See “Security Commands” on page 941.
secpolicyremove