Specifications

Fabric OS Commands
692 Fabric OS Version 3.1.x/4.1.x Reference Guide
The administrator is prompted to enter passwords for the following accounts:
■ Factory
■ Root
■ Admin
■ User
If the fabric is not in secure mode and one or more specified FCS switches are
present in the fabric, the command must be issued on the first active FCS in the
list.
If the fabric is not in secure mode and no specified FCS switches are present in the
fabric, the command can be issued on any switch.
If the fabric is not in secure mode and this command is issued, the switch reboots.
If the fabric is in secure mode and no FCS switches are present in the fabric, the
command can be issued on any switch. This is used to recover a secure fabric that
has no FCS switch.
Note: Make sure that all users (using Fabric OS CLI or Web Tools) are logged off the
fabric before enabling security mode. All users who are logged into the fabric on
non-FCS switches when this command executes have their telnet sessions terminated.
When security is enabled, this command can only be issued from the Primary FCS
switch. See “Security Commands” on page 941.
Operands
This command has the following operand:
fcsmember
Specify a list of FCS switches. The list of member switches must
be enclosed in quotation marks and each member switch must
be separated by semicolons. The members can be specified
using Domain, WWN, or switch name format. For example:
“5; 10:00:00:60:69:00:00:20; star1“
If a member is specified by Domain, or switch name, the switch
must be in the fabric or the command fails. This operand is
optional. If no operand is specified the session becomes
interactive and you are prompted to enter FCS member values.