Specifications

secmodeenable
691Fabric OS Version 3.1.x/4.1.x Reference Guide
Enable security mode.
Synopsis
secmodeenable [“fcsmember;fcsmember”]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to enable security mode on all switches in the fabric. This
command fails if any switch in the fabric is not capable of enforcing the security
policies defined in the security database. If no operand is specified the command
becomes interactive.
Note: sectelnet must be used to open a secure telnet session into a switch.
This command sets up security in the fabric by executing the following:
■ Activates security mode on all switches in the fabric
■ Creates the security database populated with a list of FCS switches in the
FCS_POLICY
■ Distributes the security database to all switches in the fabric
■ Resets the Root, Factory, Admin, and User account passwords on all FCS
switches
■ Resets the Admin account password on all Non FCS switches
■ Disables the Root, Factory, and User accounts on all non-FCS switches in the
fabric
secmodeenable