Specifications

Fabric OS Commands
670 Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays QuickLoop statistics.
Synopsis
qlStatsShow
Availability
All users.
Release
V3.1.x
Description
Use this command to display the following QuickLoop switch statistics:
Note: This command requires an Advanced Zoning license.
qlStatsShow
Last QL init time: Time of last QuickLoop initialization.
QL init attempted: Number of QuickLoop initialization attempts.
QL init succeeded: Number of times QuickLoop is initialized.
Single switch QL: Number of times as single switch QuickLoop.
These numbers are only valid when two
switches are configured to run as peers in
QuickLoop.
Dual switch QL: Number of times as dual switch QuickLoop.
These numbers are only valid when two
switches are configured to run as peers in
QuickLoop.
QL enabled: Number of times QuickLoop is enabled.
QL disabled: Number of times QuickLoop is disabled.
Port caused QL init: Port that caused last QuickLoop initialization.