Specifications

qlPortDisable
661Fabric OS Version 3.1.x/4.1.x Reference Guide
Disable a QuickLoop port.
Synopsis
qlPortDisable port
Availability
Admin
Release
V3.1.x
Description
Use this command to change the specified port from QuickLoop mode to fabric
mode. This excludes any devices connected to the port from the QuickLoop, and
causes the switch to re-initialize the QuickLoop. If the switch that the port belongs
to has a partner that is running in QuickLoop mode, both switches re-initialize the
QuickLoop to form a loop that excludes any devices connected to the specified
port.
If the qlPortDisable command is entered for a port, the qlEnable
command has no effect on that port, because it has been removed from QuickLoop
management. The port must be re-enabled using the qlPortEnable
command.
The specified port must be in QuickLoop mode for this command to have effect.
Note: This command requires an Advanced Zoning license.
Operands
This command has the following operand:
qlPortDisable
port Specify the port number to be modified from QuickLoop mode to
fabric mode. Valid values for port number vary depending on the
switch type. This operand is required.