Specifications

qloopAdd
649Fabric OS Version 3.1.x/4.1.x Reference Guide
Add a member to a QuickLoop.
Synopsis
qloopAdd “qloopname”, “member;member”
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to add one or more members to an existing QuickLoop.
When a configuration is enabled, all QuickLoops defined in the configuration
must resolve to one or two switch World Wide Names.
Zone alias names entered as members of this QuickLoop must be defined with
WWNs. Zone alias names that are defined by domain and port number, or AL_PA
are not accepted as members of the QuickLoop.
Note: This command requires an Advanced Zoning license.
When security is enabled, this command can only be issued from the Primary FCS
switch. See “Security Commands” on page 941.
qloopAdd