Specifications

Table Of Contents

Fabric OS Commands

648 Fabric OS Version 3.1.x/4.1.x Reference Guide

Note: If the qlPortDisable command has been entered for a specific port, the

qlEnable command cannot re-enable that port, because it has been removed from

QuickLoop management. The port must be specifically re-enabled using the

qlPortEnable command.

If Advanced Zoning is in use the qlDisable, qlEnable, and qlPartner

commands are not in effect. In this case, the qlPortEnable command can be used

to enable individual ports.

This command requires an Advanced Zoning license.

Operands

None.

Example

The following entry enables QuickLoop mode: