Specifications

Fabric OS Commands
592 Fabric OS Version 3.1.x/4.1.x Reference Guide
Assign or display a port name.
Synopsis: V3.1.x
portname port_number, “port_name”
Synopsis: V4.1.x
portname [slotnumber/]portnumber, “portname”
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to assign or display a port name. Both operands are optional
for this command.
With both the operands present, the port name string will be assigned to the port.
With only the port name operand, the previously assigned port name will be
displayed. With no operands, the port names of all the ports present will be
displayed.
The port name is a string of length 32 characters or less. It may consist of white
spaces or printable characters, excluding the characters comma and semi-colon.
By default, a port has no name until it is explicitly assigned by the user.
A null string (that is no port name operand specified) is used as the default port
name when a port had no user assigned name. A port name can be reset to the
default value by executing the portname command with the second operand as
a null string.
Like all other configurable port attributes, port name will be persistent across
reboots and power cycles. It will not be affected by configdefault
command but it will be cleared by portcfgdefault.
portname