Specifications

portLogShow
583Fabric OS Version 3.1.x/4.1.x Reference Guide
For a full explanation of the information displayed by this command refer to the
HP StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User
Guide.
Operands
This command has the following operands:
Cmd Defined by the event. Refer to the HP StorageWorks Fabric
Operating System Procedures Version 3.1.x/4.1.x User Guide
for
more information.
Args Displays more information about the event.
For ioctl events, these are the I/O control arguments
For Tx and Rx, these are the first two header words and word four
of the FC-PH frame along with the first word of the payload and
internal decoding field.
count Specify the maximum number of lines to display. Only the most
recent count entries are displayed. This operand is optional.
saved Specify a non-zero value to display the saved port log from the
last switch fault. See uptime for a list of conditions that cause a
fault. The count is ignored when displaying the saved log. This
operand is optional.
portid For V3.1.x, specify a non-zero value that specifies which port will
be displayed.
For V4.1.x, specify the area number of port to be displayed. If a
port area number is specified, all other ports on the switch are
ignored. This operand is optional.