Specifications

Fabric OS Commands
574 Fabric OS Version 3.1.x/4.1.x Reference Guide
For a full explanation of the information displayed by this command refer to the
HP StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User
Guide.
Operands
This command has the following operands:
Example
To display the port log:
Cmd Defined by the event. Refer to the HP StorageWorks Fabric
Operating System Procedures Version 3.1.x/4.1.x User Guide
for
more information.
Args Displays more information about the event.
For ioctl events, these are the I/O control arguments
For Tx and Rx, these are the first two header words and word four
of the FC-PH frame along with the first word of the payload and
internal decoding field.
count Specify the maximum number of lines to be displayed. Only the
most recent count entries are displayed. This operand is optional.
saved Specify a nonzero value to display the saved port log from the last
switch fault. See uptime for conditions that cause a fault. The
count operand is ignored when displaying the saved log. This
operand is optional.
portid Specify the port to be displayed. All other ports will not be
displayed. This operand is optional.
switch:admin> portlogdump 10
time task event port cmd args
-----------------------------------------------------
16:51:15.499 tShell ioctl 7 de 10f9bb90,0
16:51:15.499 tShell ioctl 8 de 10f9bb90,0
16:51:15.499 tShell ioctl 9 de 10f9bb90,0
16:51:15.499 tShell ioctl 10 de 10f9bb90,0
16:51:15.499 tShell ioctl 11 de 10f9bb90,0
16:51:15.499 tShell ioctl 12 de 10f9bb90,0
16:51:15.499 tShell ioctl 13 de 10f9bb90,0
16:51:15.499 tShell ioctl 14 de 10f9bb90,0
16:51:15.499 tShell ioctl 15 de 10f9bb90,0
16:58:28.383 tShell create tSyslog
switch:admin>