Specifications

backplanetest
57Fabric OS Version 3.1.x/4.1.x Reference Guide
Examples
Test backplane connections on a StorageWorks Core switch:
Errors
When this command detects failures, the subtest may report one or more of the
following error messages:
DATA
TIMEOUT
XMIT
See Also
backport
switch:admin> backplanetest -ports 1/16, 18, 20 -payload 2048 -verbose 1
Running Backplane Conn Test .....
Checking for ports segmented
Test frame info for Backplane Connection Test:
# of frames: 1
sid data: 0xfffffd
did data: 0xfffffd
payload size: 2048 bytes
(using jCRPAT data, seed: 0xa363c42b)
BPC_TX 1 P->B Sl3 Ch2 cPt0(bPt16)->Sl1 Ch2 ...
BPC_RX 1 P->B Sl3 Ch2 cPt0(bPt16)->Sl1 Ch2 ...
BPC_TX 1 B->P Sl1 Ch2 cPt0(bPt16)->Sl3 Ch2 ...
BPC_RX 1 B->P Sl1 Ch2 cPt0(bPt16)->Sl3 Ch2 ...
Checking for ports segmented
BPC_TX 1 P->B Sl4 Ch2 cPt2(bPt18)->Sl1 Ch2 ...
BPC_RX 1 P->B Sl4 Ch2 cPt2(bPt18)->Sl1 Ch2 ...
BPC_TX 1 B->P Sl1 Ch2 cPt2(bPt18)->Sl4 Ch2 ...
BPC_RX 1 B->P Sl1 Ch2 cPt2(bPt18)->Sl4 Ch2 ...
Checking for ports segmented
BPC_TX 1 P->B Sl2 Ch2 cPt4(bPt20)->Sl1 Ch2 ...
BPC_RX 1 P->B Sl2 Ch2 cPt4(bPt20)->Sl1 Ch2 ...
BPC_TX 1 B->P Sl1 Ch2 cPt4(bPt20)->Sl2 Ch2 ...
BPC_RX 1 B->P Sl1 Ch2 cPt4(bPt20)->Sl2 Ch2 ...
passed.
Test Complete: “backplanetest” Pass 1 of 1
Duration 0 hr, 0 min & 5 sec (0:0:5:429).
switch:admin>