Specifications

portcfgpersistentenable
551Fabric OS Version 3.1.x/4.1.x Reference Guide
Enable a port persistently.
Synopsis
portcfgpersistentenable portnumber
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to persistently enable a port. Persistently enabled ports remain
enabled across power cycles, switch reboots, and switch enables. By default a port
is enabled persistently. The change in configuration is effective immediately.
The persistent disable configuration overrides all other port configurations but it
does not change the configuration of any other port settings. A persistent port
enable will re-enable all previously set port configurations of that port. A
persistently enabled port can temporarily be disabled by portdisable or
switchdisable command. The switchdisable command will also
disable the persistently enabled ports of that switch.
The persistent switch disable or enable configuration does not alter the persistent
disable or enable configurations of the ports within the switch.
The configuration commands, configdefault and portcfgdefault, do
not modify the persistent enable attribute of a port.
Operands
This command has the following operands:
portcfgpersistentenable
portnumber
Specify a port number. Valid values for port number vary
depending on the switch type. This operand is required.