Specifications

perfShowPortEEMask
523Fabric OS Version 3.1.x/4.1.x Reference Guide
Note: This command requires an Advanced Performance Monitoring license.
Operands
This command has the following operand:
Example
To display the port end-to-end mask on blade 2 port 4:
slotnumber
(V4.1.x only)
Specify the slot number for a StorageWorks Core
switch. For all other switches this operand is not
required. The slot number must be followed by a slash
( / ) and the port number, so that each port is
represented by both slot number (1 through 4, or 7
through 10), and port number (0 through 15).
The StorageWorks Core switch has a total of 1–10
slots. Slot number 5 and 6 are control processor cards,
and slot 1 through 4, and 7 through 10, are port
cards. On each port card, there are 16 ports counted
from the bottom, 0 to 15.
portnumber Specify a port number. Valid values for port number
vary depending on the switch type. This operand is
required.
switch:admin> perfShowPortEEMask 2/4
TxSID Domain: on
TxSID Area: on
TxSID ALPA: off
TxDID Domain: on
TxDID Area: on
TxDID ALPA: off
RxSID Domain: on
RxSID Area: on
RxSID ALPA: off
RxDID Domain: on
RxDID Area: on
RxDID ALPA: off
switch:admin>