Specifications

perfHelp
509Fabric OS Version 3.1.x/4.1.x Reference Guide
Example
To display commands related to performance monitoring:
See Also
None.
switch:admin> perfHelp
perfCfgSave Save Performance configuration
perfCfgRestore Restore Performance configuration
perfCfgClear Clear Performance settings from flash
perfClrAlpaCrc Clear ALPA device's CRC count
perfShowAlpaCrc Get ALPA CRC count by port and ALPA
perfAddEEMonitor Add end-to-end monitor to a port
perfDelEEMonitor Delete an end-to-end monitor on port
perfClearEEMonitor Clear an end-to-end monitor's counters on port
perfShowEEMonitor Show user-defined end-to-end monitors
perfSetPortEEMask Set overall mask for E-to-E monitors
perfShowPortEEMask Show the current end-to-end mask
perfAddUserMonitor Add filter-based monitor
perfAddReadMonitor Add filter-based monitor - SCSI Read
perfAddWriteMonitor Add filter-based monitor - SCSI Write
perfAddRWMonitor Add monitor - SCSI Read and Write
perfAddSCSIMonitor Add monitor for SCSI frame count
perfAddIPMonitor Add monitor for IP traffic frame count
perfDelFilterMonitor Delete filter-based monitor
perfClearFilterMonitor Clear filter-based monitor's counters on port
perfShowFilterMonitor Show filter-based monitors
NOTE: Don't run help command after firmwaredownload without reboot.
It will give you wrong information.
switch:admin>