Specifications

Fabric OS Commands
488 Fabric OS Version 3.1.x/4.1.x Reference Guide
grouplist Specify up to 6 sets of Offset, Mask, and ValueList
separated by a semicolon (;). The entire grouplist
operand must be enclosed in quotation marks. This
operand is required.
The grouplist operand must be specified in the
following format:
“offset, Mask, ValueList; offset, Mask, ValueList”
For example:
“4, 0xff, 0x22; 12, 0xff, 0x01”
The grouplist component values are as follows:
■ Offset - Specify the offset within the frame. Offset 0
is the first byte of the SOF, and offset 4 is the first
byte of the frame header. The Offset must be in
decimal format. Valid values for Offset are 0,
[4-63]. Offset 0 is a special case which can be
used to monitor the first 4 bytes of SOFx frames.
EOF can not be monitored.
■ Mask - Specify the mask value to be applied
(ANDed) to frame contents.
■ ValueList - Specify up to four values that need to be
captured from frame contents. The ValueList can be
either hexadecimal or decimal format.
■ SOFx frames are considered a special case. The
Offset is specified as 0x0 and valueList is specified
with:
0 - SOFf
1 - SOFc1
2 - SOFi1
3 - SOFn1
4 - SOFi2
5 - SOFn2
6 - SOFi3
7 - SOFn3
alias Specify a name for this monitor. This character string
can be a maximum of 10 characters long and is
truncated if more characters are specified. This
operand must be enclosed in quotation marks. This
operand is optional.