Specifications

perfAddIPMonitor
479Fabric OS Version 3.1.x/4.1.x Reference Guide
Operands
This command has the following operands:
Example
To add an IP monitor to blade 2 port 4:
See Also
perfAddEEMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
slotnumber
(V4.1.x only)
Specify the slot number for a StorageWorks Core switch.
For all other switches this operand is not required. The slot
number must be followed by a slash ( / ) and the port
number, so that each port is represented by both slot
number (1 through 4, or 7 through 10), and port number
(0 through 15).
The StorageWorks Core switch has a total of 1–10 slots.
Slot number 5 and 6 are control processor cards, and slot
1 through 4, and 7 through 10, are port cards. On each
port card, there are 16 ports counted from the bottom, 0 to
15.
portnumber Specify a port number. Valid values for port number vary
depending on the switch type. This operand is required.
alias Specify a name for this monitor. This character string can
be a maximum of 10 characters long and must be enclosed
in quotation marks. This operand is optional. The default
alias is IP FRAME.
switch:admin> perfAddIPMonitor 2/4, “IP”
IP traffic frame monitor #0 added
switch:admin>