Specifications

Fabric OS Commands
474 Fabric OS Version 3.1.x/4.1.x Reference Guide
Example
The following example shows how pdshow can be used to examine a panic
dump file by the name panic_dump located under the directory /tmp:
See Also
savecore
portlogdump
switch:admin> pdshow /tmp/panic_dump
*** CAUTION ***
* Host PLATFORM (current) is: 'Unknown'
* PLATFORM got from pd file is: 'Ulysses'
* Some restuls shown may be incorrect and/or missing
* It is best if this command is run on same PLATFORM as that of pdfile
**************
_______________________********________________________
* File :/core_files/panic/core.pd1038932352 *
* SECTION:PD_MISC *
-----------------------********------------------------
WatchDogRegister=0x0
Section=Startup time: Tue Dec 3 16:06:11 UTC 2002
Kernel= 2.4.19
Fabric OS= v4.1.0_j_dist_1103
Made on= Tue Dec 3 19:07:13 2002
Flash= Tue Dec 3 13:19:06 2002
BootProm= 3.2.0
Section=HA show Output
haShow=Local CP (Slot 6, CP1): Standby
haShow=Remote CP (Slot 5, CP0): Active
haShow=HA enabled, Heartbeat Up, HA State synchronized
<output truncated>