Specifications

Fabric OS Commands
472 Fabric OS Version 3.1.x/4.1.x Reference Guide
To change the password for the Admin user using V4.1.x:
Errors
When failures are detected, the subtest may report one or more of the following
error messages:
See Also
login
logout
switch:admin> passwd “admin”
Changing password for admin
Enter new password:
Re-type new password:
Password changed.
Saving password to stable storage.
Password saved to stable storage successfully.
switch:admin>
“user” is not a valid
user name.
You have not specified a user name that is a valid, recognized
user name on the system.
Permission denied. You do not have permission to change the login name or
password specified.
That user name is already
being used. (V3.1.x only)
You cannot change the user name to that of a previously
existing user.
Incorrect password. You have not entered the correct password when prompted for
the old password.
Password unchanged. You have entered the carriage return special input case,
choosing not to change the password.
Passwords do not match. You have not correctly verified the new password.