Specifications

Table Of Contents
nsShow
461Fabric OS Version 3.1.x/4.1.x Reference Guide
There may be additional lines if the device has registered any of the following
information (the switch automatically registers SCSI inquiry data for FCP target
devices):
FC4s supported
IP address
IPA
Port and node symbolic names
Fabric Port Name—This is the WWN of the port on the switch that the device
is physically connected to.
Hard address and port IP address
Operands
For V3.1.x, none.
For V4.1.x, this command has the following operand:
Example
To display local name server information:
TTL Time-to-live (in seconds) for cached entries, or NA (not applicable)
if the entry is local.
SCR
(V4.1.x only)
State change registration of the device. This is displayed if "-r"
option is given.
-r
Specify this option to replace the TTL attribute output with
SCR (state change registration) information in the display.
SCR is the state change registration of a device. This value
indicates what type of RSCN a device registers to receive.
switch:admin> nsshow
The Local Name Server has 1 entry {
Type Pid COS PortName NodeName TTL(sec)
N 060300; 2,3;10:00:00:00:c9:24:0d:b3;20:00:00:00:c9:24:0d:b3; na
FC4s: FCP
Fabric Port Name: 20:03:00:60:69:00:54:e9