Specifications

Fabric OS Commands
450 Fabric OS Version 3.1.x/4.1.x Reference Guide
Operands
This command has the following operand:
Examples
To display information about switches directly connected to the local switch:
See Also
interfaceShow
slotnumber
(V4.1.x only)
Specify the slot number for a StorageWorks Core switch.
For all other switches this operand is not required. The slot
number must be followed by a slash ( / ) and the port
number, so that each port is represented by both slot
number (1 through 4, or 7 through 10), and port number
(0 through 15).
The StorageWorks Core switch has a total of 1–10 slots.
Slot number 5 and 6 are control processor cards, and slot
1 through 4, and 7 through 10, are port cards. On each
port card, there are 16 ports counted from the bottom, 0 to
15.
portnumber Specify a port number. Valid values for port number vary
depending on the switch type. This operand is optional.
switch:admin> nbrStateShow 2/0
Local Domain ID: 15
Local Port Domain Remote Port State
-------------------------------------------------------
2 13 13 NB_ST_FULL
6 13 9 NB_ST_FULL
7 13 8 NB_ST_FULL
13 3 7 NB_ST_FULL