Specifications

nbrStatsClear
447Fabric OS Version 3.1.x/4.1.x Reference Guide
Reset FSPF interface counters.
Synopsis: V3.1.x
nbrStatsClear [portnumber]
Synopsis: V4.1.x
nbrStatsClear [slotnumber/][portnumber]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to reset the counters of FSPF frames transmitted and received
on an interface.
Use this command with no operand to reset counters on all interfaces.
Operands
This command has the following operand:
nbrStatsClear
slotnumber
(V4.1.x only)
Specify the slot number for a StorageWorks Core switch. For
all other switches this operand is not required. The slot number
must be followed by a slash ( / ) and the port number, so that
each port is represented by both slot number (1 through 4, or
7 through 10), and port number (0 through 15).
The StorageWorks Core switch has a total of 1–10 slots. Slot
number 5 and 6 are control processor cards, and slot 1
through 4, and 7 through 10, are port cards. On each port
card, there are 16 ports counted from the bottom, 0 to 15.
portnumber Specify a port number. Valid values for port number vary
depending on the switch type. This operand is optional.