Specifications

Fabric OS Commands
430 Fabric OS Version 3.1.x/4.1.x Reference Guide
Note: When security is enabled, this command can only be issued from the Primary
FCS switch. See “Security Commands” on page 941.
Operands
None.
Example
To display the Management Server access control list:
switch:admin> msConfigure
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1]
MS Access List consists of (5): {
20:01:00:60:69:00:60:10
20:02:00:60:69:00:60:10
20:03:00:60:69:00:60:10
20:02:00:60:69:00:60:03
20:02:00:60:69:00:60:15
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 0
done ...
switch:admin>