Specifications

Fabric OS Commands
414 Fabric OS Version 3.1.x/4.1.x Reference Guide
payload_pattern
(V3.1.x only)
Specify the pattern of the test packets payload.
pattern_width
(V3.1.x only)
Specify the width of the pattern which user specified.
Valid values are:
1 = byte
2 = word
4 = quad
--slot number
(V4.1.x only)
Specify the slot number in a StorageWorks Core switch.
The slot number must be followed by a slash ( / ) and
the port number.
The StorageWorks Core switch has a total of 10 slots
counted from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4, and 7 through
10, are switch cards. On each switch card, there are 16
ports counted from the bottom, 0 to 15. A particular
port must be represented by both slot number
(1 through 4 or 7 through 10) and port number (0
through 15).
This operand is not required for switches that do not
have slots.
-nframes count
(V4.1.x only)
Specify the number of times (or number of frames per
port) to execute this test. The default value is 10.
-ports itemlist
(V4.1.x only)
Specify a list of user ports to test. By default all the user
ports in the current slot are tested. Refer to itemlist
for more information on selecting ports.
-seed
payload_pattern
(V4.1.x only)
Specify the seed pattern of the test packets.
-width
pattern_width
(V4.1.x only)
Specify the width of the test pattern. Valid values
include:
1 for byte
2 for word
3 for quad
This operand is optional.