Specifications

ipAddrShow
385Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays the IP address for a switch or Control Processor.
Synopsis: V3.1.x
ipAddrShow
Synopsis V4.1.x
ipAddrShow [option]
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display the Ethernet and FC IP addresses configured in the
system.
Note: The option operand is only available on the StorageWorks Core switch. This
operand is not available on the StorageWorks 2 Gb SAN switch.
Information: V3.1.x
This command shows the Ethernet IP Address, Ethernet Subnetmask, Fibre
Channel IP Address, Fibre Channel Subnetmask, and Gateway IP address for the
switch.
The FC IP Address shows “none” if the switch is not configured to run IP over
Fibre Channel. Note that all Fibre Channel ports on a switch have the same IP
address and subnet mask.
All IP addresses are displayed in conventional dot (.) notation or by the special
value “none.” Subnet Masks show “none” if IP sub netting is not in effect.
ipAddrShow