Specifications

ipAddrSet
381Fabric OS Version 3.1.x/4.1.x Reference Guide
Set the IP Address details for a switch or Control Processor.
Synopsis: V3.1.x
ipAddrSet
Synopsis: V4.1.x
ipAddrSet [option]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to set the Ethernet and Fibre Channel IP addresses on the
switch.
Note: The option operand is only available on the StorageWorks Core switch. This
operand is not available on the StorageWorks 2 Gb SAN switch.
Parameters: V3.1.x
For V3.1.x, use this command to set the Ethernet and Fibre Channel IP and
Subnetmask addresses. You are also prompted to set the Gateway IP Address. The
option operand is not available in V3.1.x.
In V3.1.x, you are prompted to set the following values:
ipAddrSet
Ethernet IP Address Set the Ethernet IP address of the switch.
Ethernet Subnetmask Set the Ethernet subnetmask IP of the switch.
Fibre Channel IP
Address
Set the Fibre Channel address of the switch.