Specifications

Fabric OS Commands
376 Fabric OS Version 3.1.x/4.1.x Reference Guide
Turn off the In-order Delivery (IOD) option.
Synopsis
iodReset
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to turn off the IOD option. The IOD option is turned off by
default. If the IOD option was turned on using iodSet, this command can be
used to turn it off again. Setting the IOD option to its default value will result in
fast re-routing after a fabric topology change.
This command may cause out-of-order delivery of frames during fabric topology
changes.
Note: This command should not be used in HP configurations.
Operands
None.
iodReset