Specifications

Fabric OS Commands
372 Fabric OS Version 3.1.x/4.1.x Reference Guide
masterPort Port number of the trunk master port, if present, of the
trunk group this port is a part of.
defaultCost The default cost of sending a frame over the ISL
connection to this interface.
cost Cost of sending a frame over the ISL connected to this
interface. A value of 1000 indicates a 1 Gb/s link. A
value of 500 indicates a 2 Gb/s link.
delay Conventional delay incurred by a frame transmitted on
this ISL. A fixed value required by the FSPF protocol.
lastScn Type of the last State Change Notification received on
this interface.
lastScnTime Time the last State Change Notification was received on
this interface.
upCount Number of times this interface came up, with respect to
FSPF.
lastUpTime Last time this interface came up.
downCount Number of times this interface went down.
lastDownTime Last time this interface went down.
downReason Type of last State Change Notification that caused this
interface to go down.
iState Current state of this interface. The state can be UP or
DOWN. An interface in DOWN state does not have an
allocated neighbor data structure and cannot be used to
route traffic to other switches.
state Current state of this interface. This E_Port is used to route
traffic to other switches only if the state is “NB_ST_FULL.”
nghbCap Neighbor capabilities. Should be 0.
nghbId Domain ID of the neighbor (adjacent) switch.
idbNo IDB number. Should be equal to portnumber
remPort Port number on the remote switch connected to this port.
nflags Internal FSPF flags.
initCount Number of times this neighbor was initialized, without
the interface going down.
&dbRetransList Pointer to the database retransmission list.
&lsrRetransList Pointer to the Link State Records (LSR) retransmission list.
&lsrAckList Pointer to the Link State Acknowledgements (LSA)
retransmission list.