Specifications

ifShow
369Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays network interface information.
Synopsis
ifShow [“ifName”]
Availability
All users.
Release
V3.1.x
Description
Use this command to display network interface status. If the operand ifName is
provided, only that interface is displayed. If ifName is omitted, all interfaces
are displayed. Each switch has three interfaces:
“ei” or “fei” is the 10BaseT or 100BaseT Ethernet interface
“lo” is the loopback interface
“fc” is the Fibre Channel interface
The “fc” interface is displayed for switches running IP over Fibre Channel that
have been assigned an FC-IP address. For each interface selected, the following
information is displayed:
■ Flags (for example, loopback, broadcast, arp, running, debug)
■ Internet address
■ Broadcast address
■ Netmask and subnetmask
■ Ethernet address
■ Route metric
■ Maximum transfer unit
■ Number of packets received and sent
■ Number of input errors, output errors, and collisions
ifShow