Specifications

Table Of Contents
Fabric OS Commands
350 Fabric OS Version 3.1.x/4.1.x Reference Guide
Operands
None.
Example
To display control processor (CP) status:
See Also
haDisable
haEnable
haFailover
haShow
HA State Not
In Sync
The system is unable to synchronize the two CPs, due to the
Standby CP being faulty or another system error. If a fail-over
were to take place at this time, the Standby CP would be
rebooted, and the fail-over will be disruptive.
switch:admin> haShow
Local CP (Slot 6, CP1): Active
Remote CP (Slot 5, CP0): Standby
HA Enabled, Heartbeat Up, HA State not in sync