Specifications

fporttest
305Fabric OS Version 3.1.x/4.1.x Reference Guide
5. Compare ECHO data transmitted is equal to the ECHO data received.
6. Repeat step 3 through step 5 for all ports present until:
a. The number of frames requested is reached,
b. All ports are marked bad.
You can specify a payload pattern to be used when executing this test. If the
pattern is not user specified, then at every 30 pass, a different data type from a
palette of seven is used to generate different data pattern to create the frame. The
data pattern will be generated based on each data type. Some data types may
generate different data pattern on every pass, and other data type may not change
the data pattern in every pass. These seven data types will be repeated every 210
pass. The data palette is as follows:
1) CSPAT: 0x7e, 0x7e, 0x7e, 0x7e,...
2) BYTE_LFSR: 0x69, 0x01, 0x02, 0x05,...
3) CHALF_SQ: 0x4a, 0x4a, 0x4a, 0x4a,...
4) QUAD_NOT: 0x00, 0xff, 0x00, 0xff,...
5) CQTR_SQ: 0x78, 0x78, 0x78, 0x78,...
6) CRPAT: 0xbc, 0xbc, 0x23, 0x47,...
7) RANDOM: 0x25, 0x7f, 0x6e, 0x9a,...
Operands
This command has the following operands:
-nframes count Specify the number of times (or number of frames per
port) to execute this test. If omitted, the default value
used is 10. This operand is optional.
-ports itemlist Specify the ports to run to test on. If omitted, the test will
be executed on all online F_ports in the specified slot.
This operand is optional.
-seed
payload_pattern
Specify the pattern of the test packets payload. When
payload_pattern is set to 0, all seven different data
types will be used. This operand is optional.
-width
pattern_width
Specify the width of the pattern which user specified.
When payload_pattern is set to 0x00,
pattern_width will be ignored. Valid values are:
1 = byte
2 = word
4 = quad
This operand is optional.
-size
pattern_size
Specify the number of words of the test packets
payload. If omitted, the default value is 512. This
operand is optional.