Specifications

Fabric OS Commands
302 Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays the Fabric OS versions on both partitions of the local and remote CPs.
Synopsis
firmwareshow
Availability
Admin
Release
V4.1.x
Description
Use this command to display the Fabric OS versions on primary and secondary
partitions on the local CP and on the remote CP. This command identifies the
status for each CP as Active or Standby, and will also identify the slot number for
each CP.
If there is only one CP available, the command displays the Fabric OS versions for
the primary and secondary partitions on that CP.
Operands
None.
Example
To display the firmware version of a
StorageWorks 2 Gb SAN switch:
firmwareshow
switch:admin> firmwareshow
Local CP (Slot 5, CP0): Active
Primary partition: v4.1.x
Secondary Partition: v4.1.x
Remote CP is Non-redundant.
switch:admin>