Specifications

filterTest
289Fabric OS Version 3.1.x/4.1.x Reference Guide
In this test, the filter definition covers the following different filtering conditions:
Operands
This command has the following operands:
Table 8: List of Filter Test Numbers, Definitions, and Action Types
Number Filter Definition Action Type
0 unconditional match Forward
1 unconditional match List A
2 unconditional match List B
3 unconditional match Frozen
4 unconditional match Discard
5 SCAM no match and AL_PA match List A
6 SCAM&DCAM match and AL_PA match List A
7 Zone A match and AL_PA match List A
8 Zone B match and AL_PA match List B
9 Zone A&B match and AL_PA match List B
10 Zone A|B match and AL_PA match Frozen
11 Zone A|B match and AL_PA match Discard
passcnt (V3.1.x only)
Specify the number of times to perform this test.
The default value is 1.
-passcnt passcnt
(V4.1.x only)
Specify the number of times to perform this test.
The default value is 1.
-txports list
(V4.1.x only)
Specify the user port numbers to perform this test.
All user ports are set in default.
-scamoff offset
(V4.1.x only)
Specify the program location to write SCAM test
data in SCAM memory. The default value is 0. The
maximum offset number is set if the specified
number is larger than limit.
-dcamoff offset
(V4.1.x only)
Specify the program location to write DCAM test
data in DCAM memory. The default value is 0. The
maximum offset number is set if the specified
number is larger than limit.