Specifications

Fabric OS Commands
274 Fabric OS Version 3.1.x/4.1.x Reference Guide
Delete a Fabric Assist mode zone.
Synopsis
fazoneDelete “fazoneName”
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to delete an existing Fabric Assist mode zone on a fabric.
This command does not change the defined configuration (which you can view
using the cfgShow command) until the cfgSave command is issued. For
the change to become effective, an appropriate Fabric Assist zone configuration
must be enabled using the cfgEnable command. For the change to be
preserved across switch reboots, it must be saved to non-volatile memory using
the cfgSave command.
Note: When security is enabled, this command can only be issued from the Primary
FCS switch. See “Security Commands” on page 941.
Operands
The following operand is required:
fazoneDelete
fazoneName
Specify the name of the zone to be deleted, in
quotation marks.